2007 Ducati 1098 S Tricolore Fairing

In GoMotoTrip, any fairing marked as injection molded does have the OEM fitment.

• It means that they have the same accurate holes, tabs, etc for you to install our fairing on your sportbike.
• The way you took off the original fairing is the way to put GoMotoTrip’s fairing back.

INJECTED MOLDED FAIRING

The injection mold goes like this:

• The injection mold is when heated (melted) plastic is injected or poured into a cool mold, it’s then left to set and cool and provides a more accurate fitment.
• With the same injection mold production method as the OEM, thus you won’t have any fitment problems.
• You could have a review of our equipment here.

=====For your info=====

Only for some vintage sportbikes, GoMotoTrip has no injection mold but just compression molding for them, as it plays a good role in creating old model fairing.

The compression mold goes like this:

1. Compression mold is when a BIG plastic is forced to conform to the shape of a heated mold.
2. All the bolt-on fix-tab spots are manually placed by the experienced motorcycle fairing master.
3. Thus you need to have the modification and adjust the position before you put the bolt on, like drilling and cutting when necessary.

It’s rare, but if a part arrives damaged, we’ll replace it at no extra charge. Report the issue within 48 hours, ensuring the part remains unused, unmounted, and in its original packaging. Please provide photos to expedite the replacement process.

You can return a kit if it doesn’t meet your expectations. No restocking fee but you need to return it at your cost. If there are issues like paint or fitment problems, contact us for a replacement.

For details, please see our Returns & Refunds.