In GoMotoTrip, any fairing marked as injection molded does have the OEM fitment.

• It means that they have the same accurate holes, tabs, etc for you to install our fairing on your sportbike.
• The way you took off the original fairing is the way to put GoMotoTrip’s fairing back.

The injection mold goes like this:

• The injection mold is when heated (melted) plastic is injected or poured into a cool mold, it’s then left to set and cool and provides a more accurate fitment.
• With the same injection mold production method as the OEM, thus you won’t have any fitment problems.
• You could have a review of our equipment here.

=====For your info=====

Only for some vintage sportbikes, GoMotoTrip has no injection mold but just compression molding for them, as it plays a good role in creating old model fairing.

The compression mold goes like this:

1. Compression mold is when a BIG plastic is forced to conform to the shape of a heated mold.
2. All the bolt-on fix-tab spots are manually placed by the experienced motorcycle fairing master.
3. Thus you need to have the modification and adjust the position before you put the bolt on, like drilling and cutting when necessary.